404!
Nothing was found at this location. Try searching, or check out the links below.
Featured Products
-
Brands, Laboratory Furniture, S-Curve
S-Curve Cleanroom Laboratory Storage 3-Shelf Unit Thick Clear Acrylic
Brands, Laboratory Furniture, S-CurveS-Curve Cleanroom Laboratory Storage 3-Shelf Unit Thick Clear Acrylic
1/4” clear and clean acrylic – very durable
3 separate shelves for storage
Conveniently mounts to the wall or free standing
Rubber pads on the bottom prevent slipping and scratching
Protective 2” edge helps prevent spills and accidents
Flame treated edges for smoothness – no sharp edges
3 sizes available
1 per caseSKU: n/a -
Brands, Dispensers, S-Curve, Swabs & Wood Products
S-Curve Cleanroom Laboratory Equipment Cover Clear Acrylic
Brands, Dispensers, S-Curve, Swabs & Wood ProductsS-Curve Cleanroom Laboratory Equipment Cover Clear Acrylic
Laboratory Equipment Covers
Can be used as a balance shield to protect sensitive measurements
1/4” clean and clear durable acrylic
Easy to see through
Flame treated edges for smoothness-no sharp edges
3 sizes available
1 per caseSKU: n/a
Product Categories
Popular Products
-
Brands, Centrifuge, Cleanroom & Lab Supplies, Globe Scientific, Tubes
Globe Scientific Microcentrifuge Tube PE
Brands, Centrifuge, Cleanroom & Lab Supplies, Globe Scientific, TubesGlobe Scientific Microcentrifuge Tube PE
Globe’s extensive line of disposable microcentrifuge tubes are available in either polypropylene (PP) or polyethylene (PE). Sizes range from 0.25mL to 2mL. These tubes are offered with attached caps or without caps. Graduated tubes facilitate accurate sampling. The polypropylene (PP) tubes are resistant to most chemical reagents and can be autoclaved at 130oC. The polyethylene (PE) tubes are softer and can be easily cut to provide access to material at the bottom of each tube.
Globe Scientific Microcentrifuge Tube 6 x 47mm (400uL) PE, Attached Plug Cap Natural Color 1000/PackSKU: n/a -
Brands, Cleanroom & Lab Supplies, Cylinders, Globe Scientific
Globe Scientific Graduated Cylinders | Polymethylpentene | Printed Graduations
Brands, Cleanroom & Lab Supplies, Cylinders, Globe ScientificGlobe Scientific Graduated Cylinders | Polymethylpentene | Printed Graduations
The non-wetting interior surface eliminates concave menisci, providing more accurate measurements. The wide pentagonal shaped base provides stability and makes the cylinder roll-resistant. The heavy-duty plastic withstands repeated autoclaving. Switching from glass cylinders to Globe’s plastic equivalents will greatly reduce breakage and the potential for injury.
Wide opening and tapered pour spout.
Shatter-resistent
Can withstand temperatures of up to 170°C.
Also known as TPX®, a registered trademark of Mitsui Chemicals.
Conforms to ISO 6706-1981 (E) and BS 5404 Part 2 (International standards for plastic cylinders).SKU: n/a -
Brands, Coat Standard, Coats, ESD-Safe Apparel, Tech Wear
Tech Wear Traditional ESD-Safe
The Tech Wear ESD-Safe Lab Jacket is made of IVX-400 fabric which will meet the requirement of the National ESD Association’s STM 2.1-1997 and will maintain sleeve-to-sleeve continuity for a minimum of 100 washes or 2 years, whichever comes first.
Benefits & Features of the Tech Wear ESD-Safe Lab Jacket:
3 pockets
Meets normal FR requirements for polyester fabrics
Fabric will not crack or bleed off onto other surfaces
Carbon suffused monofilament nylon is Shakespeare Resistat™ fiber is conductive at 104 and is non-flaking and non-sloughing
Seams in all constructions are designed to maximize conductivity from panel to panel
Lapel collar
Life Expectancy: Under normal wearing and recommended washing conditions, Tech Wear’s exclusive IVX-400 material will maintain its usefulness and effectiveness for a minimum of 100 washings or two years, whichever comes first. Tech Wear warranties its products to be free of manufacturing defects. If you are not fully satisfied, notify Tech Wear immediately. Any garments which have been laundered, dry cleaned, altered, marked, or silkscreened/embroidered cannot be returned. To avoid pilling, do not expose ANY polyester knit fabrics to extremely abrasive conditions.Laundry Instructions: Cool or warm water wash, tumble dry low heat or hang dry. DO NOT USE BLEACH OR FABRIC SOFTENERS. The carbon-suffused mono-filament nylon is sensitive to heat and should not be exposed to laundering heat in excess of 140° F. Wash at 90° F (Maximum), and tumble dry at low heat or hang dry. This medium weight fabric will dry very quickly.
SKU: n/a -
Botron, Brands, ESD-Safe Apparel, Jacket ESD Cuff, Jackets
Botron Light Weight ESD Jacket BASF Conductive Fiber W/ESD Cuff
Botron, Brands, ESD-Safe Apparel, Jacket ESD Cuff, JacketsBotron Light Weight ESD Jacket BASF Conductive Fiber W/ESD Cuff
Botron offers smocks in, 3/4 length jackets and pullovers featuring our NEW Tuck-Strap design. Our ESD safe garments are made of 87% polyester/13% carbon and will shield your workers from charge generation. Most fabric will generate a charge when not protected with an ESD garment. Botron B7300 series is a lightweight smock fabric that provides a Faraday cage effect.
SKU: n/a